www.space-tech-lab.com

Model no: UPRE-101

  UPRE-101.jpg  UPRE-101.jpg

UPRE-101.jpg UPRE-101.jpg UPRE-101.jpg

 UPRE-101.jpg UPRE-101.jpg UPRE-101.jpg  

STR-103 Super rectifier tube upgrade ( C$480 include 2 x 866A tubes)

With this super rectifier adaptor, you can use 300B, 2A3 , 45 , 50 , 80, 83 or 866A as rectifier tubes option

This is our ultra high-end model of UPRE (Universal pre-amplifier) series, which consists of a total of 8 tubes to make this superior performance pre-amplifier. The total tube rolling combinations have more than 1,000,000 possibilities. The first row of tubes use both 12AU7/12AX7/12AT7/ECC81/ECC82/ECC83/5751/5814A or equivalent + 6SL7/6SN7/6SU7/ECC32/ECC33/ECC35 as the front end amplification stage. This section contributes about 40 % of the tonal quality.

The 2nd stage also uses a similar set of tubes which can be used in the 1st stage. This section contributes around 30% of the overall tonal quality.

The tube rectifier can use a standard 5U4G or any equivalent tube, factory default is our STR-101 super rectifier tube which gives 20-30% overall better performance than the standard 5U4G.

There are 6 different ways to play around with the tube placement, you can omit some tubes in a certain section and the unit can still work without problem. This move can let you further fine-tune the system blending the small 9 pin tubes and medium 8 pin tube sound. This could be the world's first pre-amp which can have this type of superb flexibility. Any future products offered by other manufacturers should be just inferior copycats.

By using the correct tube combinations to match the rest of your system, this unit should easily surpass competitor offerings. With the ultimate flexibility in fine-tuning, the better your opportunity to approach perfection. You will find those other pre's in the market with their inflated prices can't give you any flexibility to alter the tonal quality. Their boasts of superiority seem like empty promises.

This pre-amp uses the purest "ORGANIC" design, no negative feedback, no circuit board( PCB), no transistors, all component-to-component hand wiring with very high grade and musically selected components. Fully balanced input and output capability as well as single-ended operation.

The above photo set is the standard version in a silver metallic MDF chassis.

Now available is a super rectifier tube up-grade for the rectifier section. This super rectifier can greatly enhance the dynamics, high and low frequency extension, and bass punch. A stand-by switch for pre-heating of rectifier tubes ensures the longest operation lifetime. (Rectifier tubes are replaceable with high quality ceramic sockets installed).

Specifications
No. of inputs 1 set of XLR inputs and 1 set of  RCA inputs
No. of outputs 1 set of RCA+XLR balanced pre-amp outputs , 1 set of record outputs, 1 headphone output
Freq response 1Hz - 100Khz (-3db)
S/N better than 85 db 
Gain x5- x8 depending on the tubes
Phase inverted (option: non-inverted)
manufacturing hand-wired point to point/comp-to-comp
Tubes used 2 x 6SL7 (alt: 6SN7/6SU7/ECC32/ECC33/ECC35 or equivalent)

2 x 6SN7 (alt: 6SL7/6SU7/ECC32/ECC33/ECC35 or equivalent)

4 x 12AU7 (alt: 12AX7/12AT7/ECC81/ECC82/ECC83 or equivalent)

1 x STR-101 (alt: 5U4G/5Y3/5AR4/274B/53KU/5R4/STR-103...etc)

   

         

1 year free parts and labor warranty under normal operation conditions
standard chassis : Gold/ Black/Silver Metallic  MDF or Aluminum chassis

(optional chassis : Mirror steel, black piano , solid-oak )

Information posted by www.Space-Tech-Lab.com  (copyright 1996-2008 all rights reserved)

Back to Pre-Amplifier page