www.space-tech-lab.com

Model no:P-105

  

  

  

  

  

  

MC/ MM Phono pre-amplifier

This is our best phono pre-amplifier, it is equipped with all the desired features of a hi-end phono stage. Variable input loading impedance for MC cartridges from 100ohm to 47Kohm, RC-RIAA (no NFB) ensures the most pure and open sound quality. A balanced output stage fully utilizes our balanced input pre-amplifier exceptional quality.

This phono stage can give you a very warm and open sound quality, making the vinyl even smoother, sweeter, and more alive than ever. A no-negative-feedback circuit ensures no compression in the sound stage. At least 20-30% more depth and width in the sound stage can be achieved, compared with traditional 2-3 tube feedback circuits.

The MC section is built with a super low noise solid-state circuit which can internally select x3 ,x8 , x15, x20 or x30 MC gains.

There are two separate gain controls sitting beside each 6SL7 output tube for left/right channel output level balancing purposes, so that you can use whatever NOS tubes you desire, without the requirement of closely matching.

The lowest set of photos show the enhanced version of this model, in which the power supply section is completely replaced with an external high reserve power Tx and a big tube rectifier. It boasts 3-way rectification capability (tube/diode/tube+diode).(Additional costs Apply).
Specifications
No. of inputs 1 set of MC + 1 set of MM   inputs
No. of outputs 1set of RCA + 1 set of balanced outputs (for XLR input > or = 10Kohm)
Freq response RIAA +/- 0.5db from 20Hz - 20Khz
S/N > 70 db MM/MC
Max. output volt 10Vrms minimum
Phase non-inverted for MM / MC
manufacturing hand-wired point to point for tube sectioin
Tubes solid-state(MC) + 2 x 12AX7(or 12AU7) + 2 x 6SL7(or 6SN7) (MM) + 6X5GT

1 year limited warranty under normal operation conditions
standard chassis : Gold/ Black/Metallic  MDF , Aluminum chassis

(optional chassis : Mirror steel, solid-oak )