www.space-tech-lab.com

Model no:   A-102

A-101-1.jpg  2-101-1.jpg

 
20Wrms / channel All-in-one (pre-amp / power amp / integrated amp / headphone amp)

This is one of our newest state-of-the-art designs, which is truly a multi-purpose fit for almost every application. This unit is composed of a pure tube pre-amplifier circuit of 6SL7x3 , with a built-in HPF input (high pass filter) and a solid-state 20Wrms non-negative feedback buffer amplifier, which can serve the following different configurations:

1. Pure class A single-ended tube pre-amplifier use 6SL7 x 3 ( alt: 6SN7/6SU7/6188/ECC32/ECC33/ECC35)

2. 20W/ch Class A hybrid power amplifier with 4-16 ohm driving capability

3. 20W/ch Class A hybrid high frequency band power amplifier for easy bi-amping (300Hz - 150Khz)

4. 20W/ch Class A hybrid headphone amplifier which can drive headphone with any sensitivity

5. 20W/ch Class A line level input integrated hybrid amplifier

6. Connect another power amplifier to form a bi-amping system

When using the HPF input mode, this amplifier can give the same loudness and dynamic level same as a 100Wrms power amplifier.

Specification
No. of input

1 set of RCA full range input 

1 set of HPF input (300Hz up)
No. of output

1 set of RCA pre-out, one set of speaker output

(additional input and output as options)
Freq response 1Hz - 150Khz (-3db)
S/N better than 90 db
Distortion less than 0.2% at 1Wrms output
Gain x10 - x20 depend on tube
Phase 180deg inverted
manufacturing hand-wire point to point for tube section
Tubes used 3 x 6SL7   ( alt: 6SN7/6SU7/6188/ECC32/ECC33/ECC35)
   

         

1 year limited warranty, tubes 90 days under normal operation condition
standard chassis : Gold/ Black/Metallic  MDF , Aluminum chassis

(optional chassis :  Mirror steel, solid-oak )