STL-Power
Hi-end OFC power cable
Rich sound with good punchy bass,
enhance dynamic and improve naturalness of overall tonal balance
MSRP (C$400/6
ft C$580/9 ft C$700/12 ft)
Direct order price (C$200/6
ft
C$280/ 9 ft C$350/ 12 ft)
|
STL-XLR
Hi-end OFC non-shield XLR cable
Best opened airy sound with
un-shielded minimal inductance design, rich and warm with high dynamic and
good resolution, all pure copper to give the most organic natural tonal
balance
MSRP (C$200/1m
pr C$280/2m pr C$360/3m pr)
Direct order price
(C$100/1m pr C$140/2m pr C$180/ 3m pr)
|
STL-RCA
Hi-end OFC non-shield RCA cable
Best opened airy sound with
un-shielded minimal inductance design, rich and warm with high dynamic and
good resolution, all pure copper to give the most organic natural tonal
balance .
MSRP (C$160/1m
pr C$240/2m pr C$320/3m pr) without lock
(C$200/1m pr C$280/2m pr C$360/3m pr) with
lock
Direct order price
(C$80/1m pr C$120/2m pr C$160/ 3m pr)
without lock
(C$100/1m pr
C$140/2m pr C$180/ 3m pr) with lock
|
XLR-VolBox
RCA-VolBox
Hi-end XLR balanced volume
control
Best for Bi-amp system tonal balance
calibration purpose. Short connector tail ensure purest transparent tonal
quality. Hi-grade ALPS volume pot with solid metal control knob. True
balanced design.
MSRP (C$700/pair )
XLR balanced input and output version
(C$500/pair) RCA input and output version
Direct order price (C$350 / pair ) XLR balanced input
and output version
(C$250 / pair) RCA input and
output version
|
BIASMETER
Digital readout bias-meter
Large digital LED readout for easy
calibration of your power amp tube bias level, 0-1999mA readout, DC 9V
battery operation with on/off switch.
MSRP (C$360)
Direct order price
(C$180)
|
SMD-DIP
24/28 pin SMD to DIP converter, this product include a
high quality double side FR4 PCB with two rolls of 14 pins gold plated
molex pin , you can solder whatever 28pin SOIC on the PCB to convert it
into 28 pin DIP package, for those chips which got no more DIP package,
this is a saver. The product also very suitable for prototype or small
scale production without the requirments to make a circuit board for the
SMD chips. (chips not included and is only for illustration purpose).
Minimum order qty 10sets
MSRP (C$100) for 10 sets
Direct order price
(C$50) for 10 sets
|
STR-103 Super tube
rectifier
This is an option for up-grade of any pre-amp, power amp,
buffer and DAC with 5U4G or equivalent tubes in the rectifier section.
Simply remove the original tube and plug in this super rectifer, you will
immediate boost the dynamics, depth/height/width of the sound stage, more
natural in tonal quality and much better instrumental and vocal separations,
the degree of improvement from 30-50% depend on the quality of the system.
You can also use a lot of different tubes for tonal quality fine-tunning.
Some tubes run single and some run double, a bypass switch installed for
single tube operations.
tubes can be use : 866A, 83, 80, 280, 283, 2A3, 300B,
50, 3B28.....etc, and many other compatible tubes
MSRP (C$960)
Direct order price (C$480) |
STR-1001 Super
tube rectifier
This is an option for up-grade of any pre-amp, power amp,
buffer and DAC with 6X5, 5U4G or equivalent tubes in the rectifier section.
Simply remove the original tube and plug in this super rectifer, you will
immediate boost the dynamics, depth/height/width of the sound stage, more
natural in tonal quality and much better instrumental and vocal separations,
the degree of improvement from 30-80% depend on the quality of the system.
You can also use a lot of different tubes for tonal quality fine-tunning.
Some tubes run single and some run double, a bypass switch installed for
single tube operations.
tubes can be use : 872A, 845, 805, 811A, 211, .....etc,
and many other compatible tubes
MSRP (C$2,360)
Direct order price (C$1,180)
| |
STR-1002 Super
tube rectifier
This is an option for up-grade of any pre-amp, power amp,
buffer and DAC with 6X5, 5U4G or equivalent tubes in the rectifier section.
Simply remove the original tube and plug in this super rectifer, you will
immediate boost the dynamics, depth/height/width of the sound stage, more
natural in tonal quality and much better instrumental and vocal separations,
the degree of improvement from 50-100% depend on the quality of the system.
You can also use a lot of different tubes for tonal quality fine-tunning.
A bypass switch can select single tube or dual tubes operations. This
model can even let you mix up different tube types in one single unit
for tonal blending effect.
tubes can be use : 872A, 845, 805, 811A, 211, .....etc,
and many other compatible tubes
MSRP (C$3,760)
Direct order price (C$1,880) standard
chassis with flat or metallic paint
or (C$1,980) lacqor gold or black
chassis as shown in photo
|